• S-CAPEPLUS Youth Model

    This is the Inflatable Model of S-CAPEPLUS. It is designed to reduce physical strain for paramedics during staircase transfers.

    Youth model of the S-CAPEPLUS Evacuation Mat. The length is 175 cm. Designed for schools, paediatric hospitals & shorter individuals.

    Protecting people. Saving lives:

    Children with reduced mobility are not able to escape independently during an emergency evacuation. The S-CAPEPLUS Evacuation Mattress was redesigned to bring these children and shorter individuals to a safe area.

    Tested by children:

    The S-CAPEPLUS was tested by children from a primary school in Arnhem, The Netherlands. Because of the innovative and easy-to-use design, children can use the evacuation system as well.Only a short instruction is needed and children can bring each other to a safety zone. Also when they need to evacuate via flight of stairs.

    Also for adults with small statures

    Some people with small statures (e.g. dwarfism) may need to use crutches, a scooter, or a wheelchair to get around. When an emergency occurs, these shorter individuals will need assistance on their way out. Leaving someone behind is not an option.

  • S-CAPEPLUS Youth Model + Wall Cover

    Dealing with bedridden patients in emergencies can be extremely stressful.
    The S-CAPEPOD Standard Model helps evacuate bedridden people in emergencies.
    It is a simple-to-deploy evacuation device, stored below the bed mattress; when it is required it can be simply unfolded and fitted around the person laid on the bed mattress.
    The S-CAPEPOD uses a unique closing system, which hasn’t been used before on an evacuation sheet.
    This closing systems will allow you to carry small medical equipment / oxygen bottles on the way out.

     

    • Anti Bacterial
    • Unique Packing System
    • Patented Technology

  • Wall Cover Green – English Print, incl. set of screws

    Fire retardant cover to store your Basic or Premium model of the S-CAPEPLUS Evacuation Mattress. It will be attached to a wall in a convenient location for accessibility. With the Wall Cover you can ensure that your evacuation mattress is ready for immediate use during an emergency evacuation.

     

    • Complies with fire retardancy test DIN 4102-1 Class B1 & B2
    • 100% polyester
    • Hook and loop fasteners for closure

  • S-CAPEKIDS Evacuation Mat

    Leave no single baby behind during an emergency evacuation.

     

    The evacuation device consists of four   different compartments. This allows one or two carers to evacuate four babies simultaneously.
    In the case of an evacuation, you can only carry two kids at a time down the stairs and out to mounted to the wall. After positioning the baby onto mattress, you fixate the arms
    and belly. Secondly, you fixate the head with the head blocks. After doing this, you cocoon the baby with the
    flap. Now you can start the evacuation.

     

    • Speed, Ease-Of-Use & Comfort
    • Fire retardant
    • Can evacuate up and down the stairs
    • Has a wall cover to fixate on the wall

  • S-CAPEPLUS Inflatable Model

    Several studies have shown that back pain is a serious health issue for paramedics. Frequent lifting and carrying of patients results into high cumulative loads on the back. These facts indicate that patient transport is the major cause for this problem. That’s why ergonomic improvements to transport aids are needed to improve the health and well-being of paramedics. The S-CAPEPLUS Inflatable Model is designed to smoothen the process of a medical evacuation and reduce the physical strain for paramedics. It also provides much more patient comfort compared to vacuum mats or spine boards and prevents the development of pressure ulcers (decubitus) during stabilization. The bottom side of this S-CAPEPLUS is also equipped with the world’s strongest fiber: Dyneema®. The Inflatable Model consists of four different parts: Air Mattress, S-CAPEPLUS Cover, Storage Bag, Feet Board & Dual Action Hand Pump. Head blocks can be attached to the Inflatable Model to stabilize the head and neck.

    Faster Prehospital Evacuation
    Improve Well-Being Of Staff
    Prevents Pressure Ulcers
    Reduce Heavy Lifting
    The World’s Strongest Fiber, Dyneema®

  • Retmex Rescue Sheet (Comfort Model) with PVC handles

    The Comfort Model is designed to make it easier to effectively transfer patients both on and off stretchers.

     

    • The Comfort Model contains 12 handles and can be used by up to 6 people.
    • For hygiene reasons, the fabric is water resistant. It can easily be wiped off.
    • The foot sack creates extra stability when placing a victim onto the Rescue Sheet.
    • The PVC on the handles increases comfort for the rescuer.
    • The Comfort Model comes in a small portable bag. After removing the Rescue Sheet from the bag, you open it up so you can place a victim onto the Comfort Model.

  • S-CAPEPLUS Premium Model

    The S-CAPEPLUS Evacuation Mattress allows you to safely evacuate an immobile or unconscious person during an emergency. The polyester material easily glides over the stairs and various kind of surfaces. The body flaps tightly secure the person on the thick foam mattress, which gives protection on the way out. S-CAPEPLUS requires far less training and there’s no maintenance contract. The S-CAPEPLUS Premium has a similar design to the Basic Model, however, there are some remarkable changes:

     

    • The back side and feet section is created with the world’s strongest fiber, Dyneema®, which is 15x stronger than steel.
    • It contains head blocks to fixate the head and a card board at the feet end to stabilise the weight.
  • S-CAPEPLUS Basic Model

    The S-CAPEPLUS Evacuation Mattress allows you to safely evacuate an immobile person during an emergency. It’s incredibly simple to use, which makes this S-CAPEPLUS an effective rescue tool for responders.

     

    • The polyester material easily glides over various kind of surfaces.
    • The body flaps tightly secure the person on the thick foam mattress, which gives protection on the wayout.
    • Going down the stairs is as easy as 1, 2, 3.
    • The mattress is made with fire retardant material.
    • Users can save a lot of money compared to traditional evacuation equipment: the S-CAPEPLUS requiresfar less training and there’s no maintenance contract.
    • Also, it can be used to evacuate unconscious victims.

  • S-CAPEPLUS® Basic Model + Green Wall Cover (ENG)

    The S-CAPEPLUS Evacuation Mattress allows you to safely evacuate an immobile person during an emergency.
    It’s incredibly simple to use, which makes this S-CAPEPLUS an effective rescue tool for responders.

     

    • The polyester material easily glides over various kind of surfaces.
    • The body flaps tightly secure the person on the thick foam mattress, which gives protection on the way out.
    • Going down the stairs is as easy as 1, 2, 3.
    • The mattress is made with fire retardant material.
    • Users can save a lot of money compared to traditional evacuation equipment: the S-CAPEPLUS requires far less training and there’s no maintenance contract.
    • Also, it can be used to evacuate unconscious victims.

     

    Features of the Green Wall Cover:
    • Fire retardant cover to store your evacuation mattress.
    • Applicable for both the Basic & Premium Model of S-CAPEPLUS.
    • Complies with fire retardancy testDIN 4102-1 Class B1 & B2.
    • Dimensions: 100x60x17 cm
    • Weight: 500 gram
    • Material: 100% polyester

  • S-CAPEPOD Evacuation Sheet – Standard Model

    Dealing with bedridden patients in emergencies can be extremely stressful.
    The S-CAPEPOD Evacuation Sheet Standard Model helps evacuate bedridden people in emergencies.
    It is a simple-to-deploy evacuation device, stored below the bed mattress; when it is required it can be simply unfolded and fitted around the person laid on the bed mattress.
    The S-CAPEPOD uses a unique closing system, which hasn’t been used before on an evacuation sheet.
    This closing systems will allow you to carry small medical equipment / oxygen bottles on the way out.

     

    • Anti Bacterial
    • Unique Packing System
    • Patented Technology

  • S-CAPEPOD Evacuation Sheet – Budget Model

    This is the low-cost version of the S-CAPEPOD range. The Budget Model is permanently placed underneath the bed mattress. For this Model, a strap system is used to fixate the patient to its mattress.

     

    • The double sided hook and loop on the cross strap system allows quick and firm fixation.
    • Strong Hook & Loop Fasteners
    • The cross straps are stored into tunnels to ensure that they cannot hang loose and get stuck in the bedframe.
    • With this model, you can also evacuate down a flight of stairs.
    • Low Investment
    • Special Tunnels Keep The Straps In The Right Position

     

    Once the patient is fixated to the bed mattress, you can release the long pulling straps at the head and/or feet side. After turning the patient 90 degrees on the bedframe, you pull the mattress towards you and lower until the entire mattress is on the ground. You can now move to a safety zone.

  • Body Board Standard

    The Body Board Standard is designed to complete a transfer between surfaces. The body board is used to make a solid “bridge” between two surfaces. The person can slide across the Body Board to transfer between them. The Body Board is covered with a piece of fabric to ensure that sliding is as efficient and easy as possible. The Body Board becomes standard with a Body Board Sheet.

     

    The Body Board has two models:
    • The Standard Model which is flat and rigid.
    • The Fold Model which can be folded.

     

    Material Body Board: PU / Plywood
    Material Body Board Sheet: Polyester, Silicons

    Body Board Standard

    AED 1,165.50
  • Body Slider

    Reduce physical stress by implementing the Body Slider Sheet Method. The Body Slider is designed to minimise injuries whilst moving or transferring people.
    This is a very effective aid for turning people in bed. Place the Body Slider underneath the person, preferably underneath the hip and back. When turning the person on its back, the person will lay onto the Body Slider. Once the person lays on the Body Slider, you will be able to transfer the person in your direction.

    Body Slider

    AED 294.00
  • Panorama Picto Sign – Evacuation Mattress Sign

    Panorama Sign to place above the storage system of your S-CAPEPLUS.

    Available in different languages.
    Panorama shape (3D)
    PVC material
    Photoluminescence (‘Glow in the Dark’)

JS Bin

Main Menu