• Self loading stretcher for bariatric transport made of a special high resistance stainless steal alloy.
• The frame is renforced to ensure a 350 kg maximum payload compared to others MeBer self loading stretchers.
• It is supplied with 2 frontal Ø125×25 and 2 back Ø125×25 wheels for maximum safety during loading operations.
• The increased 4 Ø200×50 mm wheels, 2 fixed with brake and 2 rotating with self-centring system, allow easy manoeuvrability even with heavy loads.
• The rigid platform, composed by reinforced thermoplastic material, is easy to clean and disinfect.
• It also has an adjustable backrest with lockable gas spring for inclinations from 0° to 80° and fully folding sides. Vertical legs are protected by plastic buffers.
• This stretcher is supplied complete with mattress (art. 7013) and belts (N. 2 art. 608-A/MEB or 608-N/MEB and n. 1 art. 612/AN-2/MEB or art. 612/N-2/MEB).
• Thanks to the increased load capacity it can be used in coupling with the MBP bariatric platform (Article code 12080).

• Fixed stretcher built in anodized aluminium with painted rigid back rest and bed.
• Resistant and easy to clean.
• Trendelenburg and Fowler positions.
• Suitable for ambulance trolleys (TITANUS) or as a hand-carried stretcher.
• The vibration-absorbing element of the stretcher is made up of six natural rubber anti-vibration mounts which contribute to the reduction of any stress on the stretcher both when used on the trolley and especially during transport by ambulance.
• 4 extractable and adjustable handles
• 4 wheels diam. 100mm and adjustable backrest 75 degrees
• Supplied with 2 belts and 1 mattress.
• Foldable side rails
• 10G Certification

Features:
• Dimensions: 196 (L) x 55 (W) x 16(H) cm
• Lying surface: With Trendelenburg and Fowler
• Weight: 20.8kg
• Loading capacity (kg): 170
• Wheel type: 4 Small Fixed Wheels
• Material: Anodized aluminium, HDPE (High-density polyethylene)

• Extrication board for full body immobilisation to casualties with suspected spinal injury
• Contoured design that cradles the patient while ensuring proper immobilisation
• Seamless mould makes it as easy to clean as it is to use, with in-moulded pins for easy strapping, extra-large hand holds for easy access and comfort
• Water resistant, can be used in all environmental conditions
• Rigid and lightweight yet radiolucent for a clearer view of the spine during X-ray, MRI or CT scan.

• Can be used with Speedblock head immobiliser

• Made from durable carbon fibre and latex-free.

• 5 year limited warranty.

• 14 handholds.
• Dimensions: 183 x 40.6 x 5.8cm

• Weight: 6.02kg

• Double-space ambulance space cot support in aluminium, with reduced height, lateral movement, HERCULES system, 955 and 180 mm ramp with roller.
• The HERCULES is the new ambulance cot support with motor-powered loading and unloading.
• The integrated position detectors and small pushbutton ensure a safe and easy use of this support.
• The loading takes place by means of a quick-release buckle system with belt, actioned by an integrated coaxial motor.
• No outer volume.
• Equipped with a double-safety system, to ensure total safety during loading and unloading).
• Can be installed on MTX-2R and MTX-2R-AL. 180 mm ramp and 955 fixing system.
• The underneath space may house both a scoop stretcher and a spinal board, despite the reduced height (-40 cm) compared to the MTX-2.
• Certified EN1789.
• 30 cm lateral movement.

Self loading stretcher for incubators predisposed for certified fixing system
• Belongs to “FROG LITE” self loading stretchers range.
• Made of aluminium alloy to be reliable, sturdy and light.
• It has been designed to transport incubators on rescue vehicles.
• Designed without back rest, side protections and rigid platform, this stretcher has predisposition for our certified fixing device.

Main features
Height (cm): 83
Max loading height (cm): 66
Min loading height (cm): 60
Folded height (cm): 26
Width (cm): 56
Length (cm): 196
Length with folded trolley (cm): 167
Weight (kg): 27.5
Material: Painted aluminium
Loading capacity (kg): 250